Vibrator Controllers

Approx. Rs 4,500 / PieceGet Latest Price

Product BrochureProduct Details:

SPARK ECVC20 series of phase anglecontrollers are specially designed forcontrolling the electromagnetic vibratoryfeeders in Linear Feeding Applications.Electromagnetic Vibratory Feeder is avolumetric flow device widely used inpackaging machines to control the flow ofGranular Materials like Rice, Dhal, etc. Theunit produce a highly stable output voltagethat is adjustable from 1% to 99%.

Approx. Rs 5,000 / PieceGet Latest Price

Product BrochureProduct Details:

ECVIB88 - Phase angle controllers are specially designed for controlling the Bowl Feeder Vibrators. Due to the higher loads handled by Bowl Feeders, our controllers are designed to handle up to 3 Amps Current / 750VA Power. ECVIB88 comes with mains voltage compensation algorithm, which keeps the vibration same even when the supply voltage increases or decreases.

Approx. Rs 3,700 / PieceGet Latest Price

Product BrochureProduct Details:

SPARKDNA ECVIB05-02 is of phase angle controllers are specially designed for controlling the Linear Vibrator Feeders. Due to the higher loads handled by Vibrator Feeders, our controllers are designed to handle up to 3 Amps Current / 750VA Power. ECVIB05-01 has an on panel POT to set

Approx. Rs 3,500 / PieceGet Latest Price

Product BrochureProduct Details:

230Vac, 50Hz, 3A Output Current, DIN Rail, POT/0…10VDC SPARKDNA ECVC10 series of phaseangle regulators are specially designedfor controlling the electromagneticvibratory feeders. The units produce ahighly stable output voltage that isadjustable in from 1% to 99%.Thanks to the soft-start output, thefeeder runs quietly and ensures gentleproduct handling.   
Power LED indication available Run/Stop Control pins areprovided for instant stop of thevibrator An on-board fuse provides overcurrent protection for thefeeder coil as well as for theinternal semiconductors.

Approx. Rs 4,500 / PieceGet Latest Price

Product BrochureProduct Details:

230Vac, 50Hz, 6A Output Current, Panel and Wall mount ,ON - Board POT model SPARKDNA ECVIB05-01 series of phase angle regulators are specially designed for controlling the electromagnetic vibratory feeders. The units produce a highly stable output voltage that is adjustable in from 1% to 99%.Thanks to the soft-start output, the feeder runs quietly and ensures gentle product handling. 
Power LED indication available Run/Stop Control pins are provided for instant stop of the vibrator An on-board fuse provides overcurrent protection for the feeder coil as well as for the internal semiconductors.

Approx. Rs 4,000 / PieceGet Latest Price

Product BrochureProduct Details:

Digital vibrator controller230vac, 750va / 3amps, keypad input 230 vac, 50hz single phase supply?   3amps load current / 1500va? ? ? Vibration rate set using keypad din rail mount, abs plastic enclosure? ? ? Soft-start, on-board fuse? ? ? Run/stop pin, power led indication size: 100*105*55 mm3

Approx. Rs 5,800.00 / PieceGet Latest Price

Product Details:

SPARK ECVIB0109 series of phase anglecontrollers are specially designed forcontrolling the electromagnetic vibratoryfeeders in Bowl Feeding Applications.Electromagnetic Vibratory Feeder is avolumetric flow device widely used inpackaging machines to control the flow ofGranular Materials like Rice, Dhal, etc. Theunit produce a highly stable output voltagethat is adjustable from 1% to 99%.

Approx. Rs 15,000 / PieceGet Latest Price

Product BrochureProduct Details:

SPARKDNA ECVIB12 series of phase angle controllers are specially designed for controlling uptoTWELVE Electromagnetic Vibrators from a single control unit. They are designed to operate with230VAC, 50Hz supply and can handle up to 3Amps RMS load current. This works as a MODBUS RTUSlave, which receives vibration set point over MODBUS and controls the vibrators accordingly. Due toMODBUS Control, PLC doesn''t requires Analog output or DAC card.Control module has a RS232 and a RS485 ports. Module configuration (Slave ID, Baud Rate, etc.,) canbe done using RS232 and outputs can be controlled via RS232/RS485. It has a dedicated register forcontrolling each Vibrator''s output. For example, if the CH1 Register is written with a value of 0x0040,then the vibrator''s output would be 64%.This comes as 2 individual cards, one for controller and another for power driver which can be easilyconnected using 1:1 FRC Cable provided along with the product. The Controller card has a capability tocontrol upto Twelve Vibrators and each driver card is capable of handling up to 4 vibrators. In case ofeight vibrator control, user requires one controller card and two driver cards to accomplish it.