New Items

Approx. Rs 4,600 / UnitGet Latest Price

Product BrochureProduct Details:

230Vac, 50Hz, 6A Output Current, Panel and Wall mount ,ON - Board POT model SPARKDNA ECVIB05-01 series of phase angle regulators are specially designed for controlling the electromagnetic vibratory feeders. The units produce a highly stable output voltage that is adjustable in from 1% to 99%.Thanks to the soft-start output, the feeder runs quietly and ensures gentle product handling. 
Power LED indication available.??? Run/Stop Control pins are provided for instant stop of the vibrator.??? An on-board fuse provides overcurrent protection for the feeder coil as well as for the internal semiconductors.

Approx. Rs 17,000 / PieceGet Latest Price

Product BrochureProduct Details:

Two head Linear Weigher Controller – 2HLWC is an ideal choice for Multi head weigh metric applications. This control unit is developed mainly for Packaging Industry.It eliminates the need for PLC, Load cell modules and DAC modules which are generally used in Two Head Linear Weighing Machines. Hence it provides bigger cost savings to machine manufacturers.It controls the Vibrator Drive or VFD directly and achieve the required weight. It can be interfaced easily HMI using MODBUS. For multi-head machines a significant improvement on accuracy and speed can be easily seen while using it.

Standard 24V operation. Two Load cells (up to 100KGs each) be interfaced directly. RS485 for HMI interface using MODBUS. RS232 for Control unit configuration from PC using our proprietary tool. Eight Digital Inputs (Start/Stop Input, Foot switch or Delivery Request, etc.,)Eight Digital Outputs (Bucket open/close, Coarse gate, Fine gate, Delivery Ready signal) Four Analog outputs (0….10V) to control 230VAC Vibrator Drive or VFD directly.?Load cell calibration, Target weight, Coarse, Fine and Super fine settings in HMI.

Approx. Rs 5,000 / PieceGet Latest Price

Product BrochureProduct Details:

Load cells are an essential portion of many machines, used for measuring weight, load, and tension. SPARK DNA''s Load cell transmitter plays a vital role in converting the output of load cells which is normally in the range of mV (with uV sensitivity) into 0 to 10Vdc (12-bit resolution) or 16-bit MODBUS data losing the sensitivity and preserving the accuracy. Hence the output of the Load Cell Transmitter can be easily interfaced to standard controllers like PLCs, Microcontrollers

It has an inbuilt high resolution Load Cell Converter with a sampling frequency of 10SPS, which means that user can get an updated output for every 100ms.

Specifications:
??? 12Vdc / 24Vdc Supply Voltage
??? Any Load Cell from 1Kg to 100Kg
??? 10 Samples / sec.

Output options:
??? 0 - 10Vdc, 12-bit Resolution

Features:
??? Start/Stop pin, Tare pin
??? Slave Address, Baud Rate Configurable.

Mounting Options:
??? DIN Rail Mount

Approx. Rs 6,000 / PieceGet Latest Price

Product BrochureProduct Details:

Load Cell Transmitter - LCT is an ideal choice for reading the Load Cell output, which usually varies in order of uV/gm and its full scale output will be in terms of mV. A precisely designed Load Cell Amplifier is required to read its output and convert it into equivalent digital counts. LCT module is designed with a high performance 32-bit ARM Microcontroller, Load Cell Amplifier, RS232 & RS485 for MODBUS RTU and application specific Inputs and Outputs. LCT module is highly effective in weigh-metric applications mainly focused for food packing and processing industry.
Features??? Standard 24V operation.??? Interfacing with PLC or HMI using MODBUS RS232/RS485.??? Tare input can be given using MODBUS or dedicated input pin.??? Dedicated input for NPN/PNP sensor interfacing available.

Approx. Rs 15,000 / PieceGet Latest Price

SPARKDNA ECVIB12 series of phase angle controllers are specially designed for controlling uptoTWELVE Electromagnetic Vibrators from a single control unit. They are designed to operate with230VAC, 50Hz supply and can handle up to 3Amps RMS load current. This works as a MODBUS RTUSlave, which receives vibration set point over MODBUS and controls the vibrators accordingly. Due toMODBUS Control, PLC doesn''t requires Analog output or DAC card.Control module has a RS232 and a RS485 ports. Module configuration (Slave ID, Baud Rate, etc.,) canbe done using RS232 and outputs can be controlled via RS232/RS485. It has a dedicated register forcontrolling each Vibrator''s output. For example, if the CH1 Register is written with a value of 0x0040,then the vibrator''s output would be 64%.This comes as 2 individual cards, one for controller and another for power driver which can be easilyconnected using 1:1 FRC Cable provided along with the product. The Controller card has a capability tocontrol upto Twelve Vibrators and each driver card is capable of handling up to 4 vibrators. In case ofeight vibrator control, user requires one controller card and two driver cards to accomplish it.

Approx. Rs 2,500 / PieceGet Latest Price

Product BrochureProduct Details:

Digital Kitchen Timer is a highly useful device in every Kitchen, be it Home or Restaurant, which provides buzzer or alarm once the time set by the user is completed. It comes with a provision to set seven different time intervals using P1 to P7 keys. For eg: P1 can be set to 2 mins, P2 can be set to 5 mins as per user needs. User can activate upto four timers simultaneously out of available 7- set times. The set time can be changed and reset as per the requirement. Set time can be of any value between 00 and 99 minutes.

Product Description:

• 9V Power Adaptor
• LCD Display to set-up timer and to show the running time.
• Loud Alarm audible upto 10 meters.
• Soft Keys to set, reset and activate the timers P1 to P7 Wall mount Plastic casing.

Product Features:
It has 2 modes of operation.

• SET Mode – This mode is activated by pressing the SET Key. In this mode, user can select any one of the timer from P1 to P7 and can set the time value.
• RUN Mode – Once the set-up is completed, this mode is activated by selecting timer from P1 to P7. In this mode, user can select up to four

Approx. Rs 1 / PieceGet Latest Price

Product BrochureProduct Details:

MODBUS Thermocouple Transmitter – MTT converts a thermocouple input to a standard industrial MODBUS data (Signed 16-bit data). It supports multiple thermocouple types (J, K, T, R, S Thermocouples) inputs and also provides auto reference junction compensation. Digital calibration of all thermocouple ranges is performed the factory, with calibration data stored in EEPROM on board. This allows thermocouple types to be changed in the field with no need for recalibration. Cold junction compensation automatically corrects for temperature variations at the thermocouple reference junction at the transmitter.This module is designed with a high performance microcontroller, RS232 & RS485 for MODBUS. Our module functions as a MODBUS RTU Slave, which receives input read / output write command over MODBUS and perform the function accordingly. Module configuration (Slave ID, Baud Rate, etc.,) can be done using RS232 and IO Read/Write can be done via RS232/RS485.
Features Standard 24V operation. J, K, T, R, S Thermocouples and mV Inputs Programmable Burnout with Sensor Fail Indicator Inputs are not isolated- Only use ISOLATED thermocouple sensors Slave ID, Baud Rate, Configuration using MODBUS. Can be interfaced easily PLC or HMI using MODBUS.